Internship seeker Bachelor in Electromechanical H.E.R.B. Charleroi on techniciens.enligne-sk.com

School: H.E.R.B. 6000 Charleroi

Education level: Bachelor in Electromechanical 3rd year
Bachelor in Electromechanical
Highest educational level completed: number of years studied and completed with a diploma after highschool : +3
Last diploma : Bachelor in Electromechanical
Current educational level : +3
Prepared job(s): : Senior instrumentation technician (oil and gas industry, offshore)

Duration of the internship: 2
Beginning of the internship:
2005-01-01 2005-02-03
Full-time Yes
Study-work program Yes
Geographical mobility from your place of residence : 100Km >> ...

Known Tools / Software/ Methods : In charge of all electronic parts of equipment on board and at the sea, Recording System (Seal 408/428), 2D, 3D, 4D, Undershooting, Broadseis, Broadsourse, Multi Streamers deployment and recovery, Troubleshooting on-board and at the sea (by work boat operation). Maintenance of Source (G-Guns, Sleeve and Bolt), In charge of automation systems, Siemens S7-300: PLC, installation, upgrading for deck machinery for Streamers winches, MAG winches, mini winches to use by remote control. Odim / Kungsberg (steamer handling system) deck machinery and hydraulic system SYNTRAK, SEAL (408/428), DIGICOURSE, DIGIFIN, SPECTRA, ARGUS, ORCA, GUNLINK (2000-4000), NAUTILUS, SSMS, TOPSHOOTER, PRISM, ESQCPRO, GEOVATION, SEAPRONAV, PRISM (WOI, PERMIT TO WORK), OTTIS, ODIM (streamers handling system), SIEMENS S7-300 & 400, MICROSOFT OFFICE, Linux.

HGV, LGV, special vehicles licences : Crane operation G-20 (fix. Hydr. crane)

Languages :
English : Working language
French : Native
Dutch : Intermediate
Thai : Intermediate

Dear Sir,


I have 41 years old and a long experience
in oil and gas industry
(exploration,
upstream, seismic,
offshore, dredging).

I am unmarried and have not children.

I am bachelor in electromechanical.

Currently, I am field technician in electrical HV installations for
SIEMENS Energy.


Experience:

Offshore surveyor, technician during UXO operations & seismic
data acquisition in north sea (OFW project).

Offshore technician E&I (senior Instrumentation technician,
observer) in oil & gas Industry (Upstream, exploration, seismic:
worldwide).


Certifications:

• 
  Basic Safety & Emergency Preparedness (in accordance to NOGEPA &
  UK Standards;
  
  
• 
  HUET, B.O.S.I.E.T., OPITO (2005 and refresh 2009, 2013, 2014 at the
  Falcknutec);
  
  
• 
  Basic Rigging and Slinging Course by MSTS ASIA BHD, Sarawak
  Malaysia;
  
  
• 
  Rolls Royce: Deck machinery (hydraulic and electronic maintenance);
  
  
• 
  G-20 (crane operations: fixed hydraulic cranes, heavy rotating
  machines and Fall equipment protection) by KIS AS Norway;
  
  
• 
  offshore medical certification by C.M.E.T.E., Paris (France). Last
  medical certification (NMD) performed in July 2014 (Bumrungrad
  Hospital in Bangkok-Thailand) and validated by SOS International;
  
  
• 
  IGSP, BA5 by ELIA;
  
  
• 
  PADI & CMAS & IFR underwater diving license;
  
  

I am strict, rigorous, flexible, dynamic, international mobility,
autonomous, analytical mind, self-confident, motivated person,
communicative, looking for a new challenge within a leading
organization in the advanced industrial sector that will allow me to
evolve in my career.


Thank you in advance for taking an interest in my application.

CURRICULUM
VITAE


Occupation:



Current:
Field technician in electrical HV installations (PM during shunt
reactor erection).

Offshore
surveyor during UXO operations and seismic data acquisition for
Offshore wind turbines project.

Offshore
senior
instrumentation technician for oil & gas industry: upstream,
exploration, seismic & dredging.



High
experience of sea equipment's and instrumentation
(electric & electronic parts, acoustics, magnetometer,
velocity-meter, hydrophones, telemetry, optic fibre, sensors).



In
charge of the automation systems: PLC (S7-400/300) , DCS, HMI, WINCC,
streamer handling system, installation, revamping, programming,
upgrading, operating in real time, calibrations, parameters setting
for production, recording data and deck machinery (heavy rotating
machinery) for Streamers winches (ROLLS-ROYCE, ODIM/KONGSBERG).
Experience during deck operations, crane operations, Shipyards and
dry docks.



Career
Objectives: I
am a hard worker, strict, rigorous, flexible, dynamic, autonomous,
analytical mind, self-confident and motivated
individual looking a new challenge and career path
with a leading organization in the advanced industrial
sector that will allow me to evolve in my career.


Education:


2001
- 2004:


Bachelor
in Electromechanical,

Haute
Ecole Roi Baudouin,
Charleroi, BELGIUM

Training
period at ARCELOR: electrical & automation department




Work
experiences:


-
2016 (current): Siemens
Energy

Field
technician, PM in electrical HV installation (assembly, erection,
revamping, setup, troubleshooting, maintenance, HSE).


-
2016 (July-August): VBW

Offshore
surveyor during UXO operations and seismic data acquisition for
Offshore wind turbines project in north sea: Setup, calibration,
parameters setting, deployment/recovery of equipment (depth sensors,
magnetometers, acoustics, GPS, seismic sensors, altimeters), data
recording, troubleshooting.



-
2016 (May):Boskalis


Electronic
and instrumentation technician for dredging operations: positioning,
equipment and system's installation (hardware & software),
start-up, VHF-radio installation, troubleshooting.


-2005
(August) - 2014 (December):
CGG

Senior
instrumentation technician, observer.


In
charge of electrical parts (low/middle/high voltage-UPS), electronic
parts (telemetry, power, parameters setting, GPS, sensors, acoustics,
hydrophones), optical fiber, on board & at the sea, data
recording system in real time (Seal 408/428), 2D, 3D, 4D,
Undershooting, BROADSEIS, BROADSOURCE, Multi Streamers (liquid/solid)
deployment/recovery (function: team leader), maintenance ,
troubleshooting of equipments on-board and at the sea (by work boat
operation, function: team leader).


Maintenance
of Source: troubleshooting (rigid/soft arrays, air guns: G-Guns,
Sleeve & Bolt).

In
charge of automation systems, Siemens S7-400/300: PLC, DCS, HMI,
WINCC, supervision, streamer handling system, installation,
programming, metrology (calibration), parameters setting, revamping
of deck machinery (heavy rotating machinery: streamers winches,
handled by remote control or PVG).


HSE
parts (W.O.I, J.S.A, T.B.M, permits to work).

ROLLS-ROYCE,
ODIM, KUNGSBERG deck machinery & hydraulic system (HPU).

Deck
operations, crane operations, dry docks, inventories.


-2005
(January - August):ARCELOR-MITTAL

Assistant
project manager for Subcontractors department (project plan,
production, QC),
installation & programming for lubrication system &
regulation for oil tanker by PLC Siemens S7-400 (PT 100, level
sensors, pressure transducers,...);


-1999
(March) – 2004 (December):Ministry
of Justice

Technician
in logistics, statistics and maintenance of buildings (facilities);


-1998
(December) – 1999 (March):
G.M.S.


Logistic
operator & technician;


-1998
(June - December):USINOR-ARCELOR

Production
operator on CNC,
technician and QC;


-1998
(January - June):
MASSIVE

Warehouseman,
technical employee;


-1997
(January - December):
Ministry of Finances

Accountant
at incoming taxes department.


Languages:


French:
mother tongue

English:
fluent

Dutch:
basic knowledge

Thai:
good command


Other:


-
Certification: FALCKNUTEC (ENGLAND) refreshed in 2014:

• 
  B.O.S.I.E.T.
  (OPITO approved);
  
  
• 
  Basic
  Safety & Emergency Preparedness (OLF approved) in accordance to
  Nogepa & UK Standards;
  
  
• 
  HUET.
  
  

-
Certification for Basic Rigging and Slinging Course: MSTS ASIA SDN
BHD;


-
Certification for crane operations G-20
by K.I.S. AS: Hydraulic fixed cranes, Basic Rigging

and
Slinging, Falls protection equipment according by the Norwegian
standards;


-
Medical certification by C.M.E.T.E.;

-
Vaccinations: typhoid, hepatitis, yellow fever, Japanese
encephalitis, polio, tetanos;

-
Norwegian Medical Certification (July 2014) validated by SOS
International;

-
Rolls-Royce: certification Deck Machinery: hydraulic & electronic
maintenance (ODIM);

-
Underwater dives license PADI & CMAS & IFR;

-
IGSP, BA5: ELIA.


Skills:


Electromechanical,
hydraulic systems, automation, Seismic 2D, 3D, 4D, Undershooting,
Broadseis, Broadsources, multi streamers deployment and recovery,
UXO, seismic & magneto data recording system in real time,
parameters setting, calibrations, QC
in real time, troubleshooting
on board and at the sea, maintenance and troubleshooting of source
(air guns: G-Gun, Sleeve and Bolt).


Softwares
:


SYNTRAK,
SEAL (408/428), DIGICOURSE,
DIGIFIN,
SPECTRA, ARGUS, ORCA, GUNLINK (2000-4000), NAUTILUS, SSMS,
TOPSHOOTER, PRISM, ESQCPRO, GEOVATION, SEAPRONAV, PRISM
(WOI, JSA, TBM, PERMIT TO WORK),
OTTIS, ODIM
(streamers handling system), SIEMENS S7-300 & 400, WINCC,
MICROSOFT
OFFICE (Words, Excel, Access),
AUTOCAD, LINUX, EIVA Scan fish III, HYPAC, NMEA

---

Click here to edit the CV in PDF
(Anonymous)